Boundary Scan Hardware Market

Boundary Scan Hardware Market Outlook (2024 to 2034)

According to a new industry report released by Fact.MR, revenue from the global boundary scan hardware market size is estimated at US$ 1.88 billion in 2024 and is forecasted to increase at a CAGR of 6.9% to reach a market value of US$ 3.66 billion by the end of 2034.

Steady expansion of the boundary scan hardware market size is being seen because they are widely utilized in emulation, in-system, and on-chip programming throughout the manufacturing process. A scalable, high-performance platform for testing and scanning tasks is called boundary scan. This is widely used as a less expensive substitute for digital pin electronics. Boundary scanning is one of the well-known debugging methods for sub-block analysis, voltage measurement, and IC pin status monitoring.

Sales of boundary scan hardware devices are increasing as they lower overall testing costs by decreasing the requirement for physical test points, intricate test setups, and a lot of manual probing. These devices also help enhance testing procedures, improve production productivity, and drive overall efficiency.

Ongoing developments in semiconductor technology such as the creation of complex microcontrollers and system-on-chips (SoCs) are boosting the sales of boundary scan hardware as they are highly preferred for testing purposes.

Key Market Growth Drivers

• Conventional testing techniques are becoming less effective due to the growing complexity and component density of electronic devices. To thoroughly test and debug these circuits, boundary scan hardware is preferred.
• Continuous growth of smaller and more integrated electrical components is driving the need for advanced testing technologies to verify integrity and performance.
• Boundary scanning has gained popularity as it is well well-suited for testing miniature circuits in locations that typical test probes cannot access.
• Strict safety regulations in the automobile and aerospace industries have pushed the requirement for dependable and error-free electronic components, including boundary scan hardware.
• One of the key factors driving global boundary scan hardware market growth is the increasing number of Internet of Things (IoT) devices and smart electronics.
• Use of boundary scan hardware is increasing for testing IoT devices to ensure they function as planned and meet high performance and reliability standards.
• Boundary scan hardware has gained attention in various industries such as healthcare, automotive, defense & aerospace, and many others where compliance requirements and regulatory standards are stricter, and importantly, extensive testing and validation of electronic components are essential.
• A latest boundary scan hardware market trend is increasing focus on time-to-market concept, particularly for new products. Boundary scanning devices help save time by identifying and fixing problems throughout the design and production phases more quickly.

Report Attribute	Detail
Boundary Scan Hardware Market Size (2024E)	US$ 1.88 Billion
Forecasted Market Value (2034F)	US$ 3.66 Billion
Global Market Growth Rate (2024 to 2034)	6.9% CAGR
East Asia Market Value (2024E)	US$ 672.1 Million
North America Market Growth Rate (2024 to 2034)	7.1% CAGR
Controllers Segment Value (2034F)	US$ 1.11 Billion
Medical Segment Value (2034F)	US$ 1.14 Billion
Key Companies Profiled	Flynn Systems; Goepel Electronic; EWA Technologies; JTAG Technologies; Teradyne, Inc.; CheckSum LLC; Keysight Technologies; ASSET InterTech; Frontline Test Equipment, Inc.

Why Has Demand for Boundary Scan Hardware Increased Rapidly?

“Continuous Growth in Production and Development of IoT and Smart Devices”

Increasing number of IoT devices and smart gadgets is a key driving factor behind the market growth of boundary scan hardware. Growing need for reliable testing solutions is being seen, which is extremely crucial for these tools. Boundary scanning enables the comprehensive testing and verification of intricate IoT devices without requiring physical access to the circuitry.

Boundary scan hardware devices are playing a crucial role in the increasingly connected world with the internet, devices, and other gadgets. To increase the reliability of any tech platform, boundary scan devices play an important role in ensuring their efficiency.

What’s the Key Worry of Boundary Scan Hardware Providers?

“Availability of Several Alternative Methods”

Other popular testing methods such as in-circuit testing and functional testing are widely used in certain applications. In-circuit testing enables the electrical testing of particular individual components on a printed circuit board (PCB), which allows for precise defect detection and analysis. On the other hand, functional testing evaluates the entire performance of the gadget by replicating its operational conditions.

Several companies find these traditional techniques attractive because they have a track record of dependability, are well known, and are being widely used, despite the presence of boundary scan hardware that offers higher capabilities.

Country-wise Insights

East Asia is projected to hold 35.7% of the global boundary scan hardware market share in 2024. Market growth is being driven by the robust automotive, medical, IT, aerospace & defense, electronic, and other industries in the region, which require proper testing and need to meet high-reliability standards. Besides, East Asia is a huge player in semiconductor manufacturing, which requires advanced testing solutions.

Where is Boundary Scan Hardware Widely Used in the United States?

“High Demand from Automotive and Aerospace & Defense Sectors”

Attribute	United States
Market Value (2024E)	US$ 339.5 Million
Growth Rate (2024 to 2034)	7.3% CAGR
Projected Value (2034F)	US$ 683.7 Million

In the United States, demand for boundary scan hardware is increasing from the country’s well-established sectors such as automotive and defense & aerospace. The reason behind this is that these industries have strict standards for testing and quality assurance, and to guarantee the dependability and safety of the products, boundary scanning devices play a crucial role. Boundary scan hardware provides excellent testing and debugging capabilities for intricate electric components, which is essential in meeting high-quality standards.

Before any products are released in the market, boundary scan hardware enables producers to conduct non-intrusive tests that access and verify the inside circuitry, finding flaws and guaranteeing adequate performance in these industries.

What is the Market Outlook for Boundary Scan Hardware in Japan?

“Complicated Product Designs in Electronic and Automotive Industries”

Attribute	Japan
Market Value (2024E)	US$ 184.8 Million
Growth Rate (2024 to 2034)	7.7% CAGR
Projected Value (2034F)	US$ 387.9 Million

Sales of boundary scan hardware are increasing swiftly in Japan as businesses are pushing the boundaries of electronics and automotive technologies. Several organizations prefer boundary scan devices to efficiently test complicated designs of products. These designs generally have advanced integrated circuits and high-density interconnects, which are, in most scenarios, hard to access or thoroughly test using conventional methods of testing. To reduce this difficulty level, boundary scanning has non-intrusive testing features that confirm operation and connectivity at a minuscule level without the need for physical access points.

Category-wise Insights

Based on industry, the market is segmented into medical, IT & telecom, consumer electronics, automotive, aerospace & defense. Even though the sales of boundary scan hardware are high in the medical sector, growing focus on establishing strong military forces is boosting demand in the aerospace & defense industry.

Why is Demand for Controllers Increasing Continuously?

“Important Link between Boundary Scan Hardware and DUT”

Attribute	Controllers
Segment Value (2024E)	US$ 604.3 Million
Growth Rate (2024 to 2034)	6.7% CAGR
Projected Value (2034F)	US$ 1.11 Billion

Under the components, the controllers segment holds a significant revenue share of the market due to their important role in efficiently organizing and carrying out boundary scan tests. For effective and accurate tests to be performed, there is a necessity for controllers to regulate the communication between the boundary scan hardware and the device under test (DUT). These support various pins and circuits for a DUT to operate test patterns in its conductors as well as save data while analyzing the results.

To carry out the thorough testing of printed circuit boards (PCBs) and integrated circuits (ICs) without requiring physical access, controllers have become essential as electronic devices get smaller and more complicated.

Why is Utilization of Boundary Scan Hardware Growing in the Medical Industry Vertical?

“High Importance of Reliability and Quality of Electronic Components”

Attribute	Medical
Segment Value (2024E)	US$ 615.6 Million
Growth Rate (2024 to 2034)	7.1% CAGR
Projected Value (2034F)	US$ 1.14 Billion

Requirement for boundary scan hardware has shot up in the medical industry to ensure that there are reliable and high-quality electronic components being used in medical devices. Diagnostic machines and patient monitoring systems, as well as life-support devices, are some of the medical equipment that need to undergo thorough testing to operate flawlessly and comply with high regulatory standards.

In the medical field, maintaining the high reliability and safety standards required necessitates the use of boundary scan hardware so that medical electronic devices can perform better and be more reliable. It enables detailed examination of the complex circuits in these devices, pinpointing failures and affirming links without physical interventions.

Competitive Landscape

Key players in the boundary scan hardware market are focusing on research and development activities to introduce new features and capabilities and attract more end users. To stay ahead of the competition and satisfy changing customer expectations, creating controllers that are more adaptable and efficient, improving software compatibility, and integrating AI-driven diagnostics have become the need of the hour.

Companies are eyeing industries that have strong development potential, such as automotive, aerospace, telecommunications, and healthcare, where the need for dependable testing solutions is already high, yet constantly increasing.

• Corelis, a key manufacturer of high-performance boundary-scan testing and measurement software and hardware, released the 9.8.0 version of its ScanExpress™ Boundary-Scan Suite of Software in 2020.

Fact.MR provides detailed information about the price points of key providers of boundary scan hardware positioned across the world, sales growth, production capacity, and speculative technological expansion, in this new market report.

Segmentation of Boundary Scan Hardware Market Research

• By Component :

  • Controllers
  • TAP Pods
  • I/O Modules
  • Accessories

• By Industry :

  • Medical
  • IT & Telecom
  • Consumer Electronics
  • Automotive
  • Aerospace & Defence

• By Region :

  • North America
  • Western Europe
  • Eastern Europe
  • Latin America
  • East Asia
  • South Asia & Pacific
  • Middle East & Africa